Pyrocommander Specifications

• Rocket-fast Internals

  At the core of the Pyrocommander lies the ARM® 32-bit Cortex®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1-cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz

• Wireless Communication

  Two antennas enable diversity creating a safer, more reliable wireless link. Furthermore, each antenna operates at a different frequency. This increases the robustness of the wireless link. Communication has been tested at distances exceeding 1 km line-of-sight.

• USB Peripherals

  Users can upload new shows via USB Flash memory (USB Stick). The Pyrocommander has a second USB port, however, that peripheral is used to service the device or to upload new firmware.

• Touchscreen

  4.3-inch 480×272 color LCD-TFT with capacitive touch screen

• DMX-512

  Users can learn 16 DMX safety channels to the device. If the user switches on the DMX Arm key, then all listed safety channels will be setup to operate at the appropriate value

• Extended Battery Life

  Users can use the Pyrocommander continuously for 12 hours.

• Pyrocommander Choreography

  The free to download pyrocommander choreography software enables users to create their own Pyrocommander Show File. This file is installed onto an USB stick and fed to the USB controller. The pyrocommander choreography software has several functionalities. On of these functionalities is beat detection.

• Midi Timecode

  The pyrocommander can be set to autofire mode. In autofire mode the user can receive timecode from an external source via Midi Timecode.